This customer in New Orleans had a large, newly installed stamped concrete deck. The deck had been sealed by the contractor, which created a very slippery surface. A novice attempt was made to apply a sand-type non-slip, which was quickly worn down. We combine our durable coating process (vs. sealers), and our durable nano grip beads to deliver a long-lasting, non-slip surface.

Our coating process, on average, lasts 4-5 times longer than the sealer. This is a three-part formula with hardeners that results in durable, long-lasting slip protection. Our process is applied by our trained professionals and is not sold. We’ve witnessed sealer processes that combine sealer with shaved plastic or ‘shark grip’ particles. This process is good; however, it only lasts about 6 months. The tops of the embedded plastic wear, and you’re left with only a ‘sealed’ surface. This actually compounds the issue and makes the surface even more slippery. Our coating process combines small glass beads that are broadcast onto the surface and then ‘locked in’ with a top coat. The result is not only a durable coating, but a durable non-slip aggregate as well.

We mobilize throughout the US as well as international applications. Currently, we know of no other process that will match the durability and longevity of the coating process combined with our anti-slip application.

National Sealing Co.
2269 S University Dr
Fort Lauderdale, FL 33324

Phone: 1-800-651-5990
Email: Contact Us

We market and apply a unique, clear, inorganic coating that protects a wide array of different surfaces and is one of the most durable products available today.